The information on our website is accurate to the best of our knowledge and understanding. Although every effort has been made to ensure accuracy, the company cannot accept any responsibility for any direct or indirect damages resulting from possible errors or incorrect application of the information of this publication. We reserve the right to make changes.

Copyright © 2019 Ruukki Construction. All Rights Reserved.


    Perforation layout


    10 % perforation, hole size d = 4 mm, centres c = 12 mm
    15 % perforation, hole size d = 4 mm, centres c = 10 mm
    30 % perforation, hole size d = 4 mm, centres c = 7 mm
    40 % perforation, hole size d = 5 mm, centres c = 7.5 mm
    Colours & coatings


    Colour chart Coating Colour
    Standard HIARC RR20, RR21, RR23, RR24, RR29, RR32, RR33, RR34, RR35, RR40, RR41, RR42, RR43
    HIARC Matt RR40, RR41, RR45
    Colourful HIARC & Powder paint RR11, RR22, RR24, RR26, RR29, RR30, RR31, RR32,RR33, RR34, RR35, RR36, RR37, RR44, RR45, RR750
    Unique HIARC & Powder paint RAL and NCS colours available by request

    Also other coating types (e.g. anti-graffiti) are available upon request (non-stock material).

    Minimum order sizes:

    • Standard chart: No limitations
    • Colourful & unique chart: HIARC 2000m2; Powder paint 100m2


    Facade cladding system, completed with flashings, fasteners and support studs provides a fully finished facade, as well as quick and easy installation.

    Design tools

    Design tools

    To make both architectural and structural design work easier, with accurate product information in 3D form, we offer a selection of CAD / BIM -objects and software tools, to be downloaded from the Software Toolbox portal.

    Ready modelled BIM objects

    Download objects for ArchiCAD
    Download objects for Revit

    Detail drawings (.dwg)

    Detail drawings (.pdf)


    Order forms


    The profiles are delivered to the installation site in thin plastic-protected wooden pallets. Basic structure of the package is always same. Different package solutions are available for different needs. The package solutions are dependent also on delivery area.

    Storing and handling

    The number of the profiles must be checked upon delivery. The profiles can be storaged in their packages. The opened packages should be protected from moisture. 
    The profiles must be handled properly to prevent any damages. Cutting and any other machining of the profiles must be performed using appropriate tools to ensure work safety and a fault-free result. 

    Assembly instructions

    Assembly instructions document includes information about:

    • Packing
    • Transportation and unloading
    • Storing
    • Assembling.


    Suspensions should be avoided in the facade. If absolutely necessary, the supports for the suspension must be placed all the way to the substructure or frame structure.

    Facade maintenance - Fasteners

    Fasteners must be checked during maintenance work. To check the health of the fasteners, open a few fasteners in different parts of the building. Pay special attention to the general appearance of the fastener and the health of the gasket under the cover, keeping water out of the joints. Replace worn fasteners.


    Maintain a journal of facade maintenance work. Write down information such as the performed tasks, the time, the facade area involved, who performed the work and what agents were used. 

    Certificates & approvals


    A print containing package-specific information such as order, load and package numbers, contact information, content of the package (profile type and dimensions) and package weight is attached to the package.

    Conformity with standards and quality control

    The profiles are CE marked products in accordance with the EN 14782 standard (for paint coated and powder coated steel profiles). The marking is presented on the package label and the attachment to the delivery note. 

    Quality inspection of the profiles is performed in accordance with the EN 14782 standard and the additional requirements by the manufacturer.